Method for lifting and lowering of fixed pile on cutter suction dredger Factory Suppliers Manufacturers Quotes

News

Home>News > Industry News
Industry News

Method for lifting and lowering of fixed pile on cutter suction dredger

Method for lifting and lowering of fixed pile on cutter suction dredger

 The cutter suction dredger has a component called a fixed pile. Its primary effect is to cooperate with dredging and has the function of fixing the hull and moving the hull. Then its lifting plays a key effect. Today we talk about how to lift and drive. There are two kinds of hydraulic system and electric winch, the principle is similar, we take the hydraulic system as an example, the first, the need for a hydraulic cylinder, the cylinder can be implemented under the control of the system to lift, we are in the top of the cylinder device pulley, through the end of the wire rope connected to the fixed pile At the other end, the other end is connected to the hull through the pulley change direction. When the cylinder is raised properly, the fixed pile can be lifted by the steel wire rope. The raised height is the same as the stroke of the oil cylinder. When the dredge is on the drop cylinder, it is fixed. The effect of the pile due to its own gravity is reduced. This is the method of raising and lowering the fixed pile on the suction suction dredger.


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message